Jan      (at 4:12pm, Tue 28th Aug, 12)

If you don't mind I put a link to this page from my website. I love your manuals!

http://www.fabtintoys.com/meccano/

Rob      (at 6:34am, Sat 24th Mar, 12)

John
The T20A instructions are here
http://www.nzmeccano.com/image-38398

You may also like to read about this item on the NZ Forum here
http://www.nzmeccano.com/forum/showthread.php?tid=93
Regards, Rob

John Nevett      (at 7:14am, Fri 23rd Mar, 12)

Thanks, Rob for the links. I missed them on my previous look.
I also need a set of instructions for the transformer T20A as I have renovated one and want to check it.
Any help would be much appreciated
John

Rob T      (at 5:41pm, Fri 16th Mar, 12)

John
Most motor instructions can be found here
http://www.nzmeccano.com/image-53421

There is also a motor report here
http://www.nzmeccano.com/image-9103

Regards
Rob

John Nevett      (at 1:21pm, Fri 16th Mar, 12)

Could someone post a copy of the E20R electric motor instructions please. I need to do some renovation on one and it may help
thanks
John

Meccanoland      (at 1:40am, Tue 29th Mar, 11)

When trying to complete one of my 1913 outfits I used the parts list generator.
When I compared the parts list with the 1913 manual I have, I found that the Generator listed 4x1" pulleys while according the manual there should be 6x1" pulleys in all 2 - 6 oufits. Are there different part lists used in the manual.

Reply: It depends where in 1913 you are. The original 1913 manual includes the 1912 contents, with 6 1" pulleys. It is thought that most if not all 1913 outfits actually came with bossed parts, and so two 'loose' pulleys and four 'fast' ones. I don't believe that any outfits were supplied with six bossed pulleys. The 1913 "Supplementary" manual has this new parts listing. If your outfit has bossed parts there should be only four of them.