Home | Links | Contact |

Printed from www.nzmeccano.com

Top Home Bottom
Login status:  You have not yet entered your user name and password. You cannot upload photographs until you do.
Meccano GalleryUser gallerieskbissetMy OPM (Online Parts Museum)
Item 20 of 25
Up Prev Next

Sprocket Wheel, 2"  

Two versions of the 2" Sprocket, part 95. Both are single tapped. The right hand one appears to be US production, as it is tin plated and much thinner than the left hand one.

The tin plating is in unusually good condition; most of the tin plating I've seen has turned a dark gray. You may be able to see the slightly bluer shade of the tin plating when compared with the nickel plating.

The nickel wheel is 0.063" (1.6 mm) thick. The tin wheel (presumably US manufacture) is 0.032" (0.81 mm) thick.

 

Sprocket Wheel, 2"
Image by kbisset, viewed 1203 times.
Size: 247.57kb (2000x1281 pixels)

Log in to the gallery

Enter your user name and password to log in

Remember me

If you click on the box marked 'remember me next time', you will not have to log in again on this computer for three months.

If you don't have a user name yet, please click here

If you have any interesting information or comments about this page, please add them here:


Your name:
Your message:
Security check: (Please type in the text to prove you're a person!)
 

On this page...

Recent stuff going on: